产品介绍

双组份喷涂型标线涂料由两组不同的低粘度单体树脂制成的A·B两组不同组份的涂料，使用前将催化剂加入B组份中并搅拌均匀，用双组份喷涂划线机将两个不同组份的涂料通过高压混合后施划于路面。在其反应前由于粘度低渗透性好，使得附着力强，交联反应后形成大分子量的漆膜强度高，坚韧耐磨。自问世以来，其发展速度极其迅猛，应用领域不断扩展，号称第三次“标线革命"。

产品亮点：

柔韧性良好

组成单体中有良好的内增塑和交联特性，对高低温有较好的适应性。

附着力出色

树脂中的多种极性基因，加上毛细血管内渗作用，赋予产品优良的附着力。

耐磨性优/秀

活性树脂在成膜中形成的网状分子结构紧密结合配方中其他组份，坚韧耐磨。

耐候性优异

独特的分子结构造就了标线不产生低温断裂、高温软化现象，施用后几乎无老化现象。

耐光性优越

由于树脂固有的优越耐光特性，因而形成的路面标线白色的永/久洁白，其它色彩长久保持鲜艳悦目，能带给汽车司机良好的视觉效果。

自洁性突出

抗污自洁性能与普通标线对比明显，被标线称为“瓷玉标线”

环保性友好

配方中不含有有机溶剂，只在施工搅拌、涂布过程中发生少许的单体挥发。

理论用量：

各类型标线对比：

The two-component spray marking coating is made of two groups of different low viscosity monomer resins. The a · B two-component coating is made of two groups of different components. Before use, the catalyst is added to component B and stirred evenly. The two-component spraying and marking machine is used to paint two different components through high-pressure mixing and then applied to the road surface. Before the reaction, due to its low viscosity and good permeability, it has strong adhesion. After the crosslinking reaction, the paint film with high molecular weight is formed, which has high strength, toughness and wear resistance. Since its inception, its development speed is extremely rapid, and its application field has been expanding, which is known as the third "marking revolution".